PC Aviator Australia :: Instant Downloads :: FSX:Steam Addons :: Aircraft :: General Aviation :: MilViz DHC-3T Turbo Otter (FSX/FSX:SE/P3Dv3-v4)

MilViz DHC-3T Turbo Otter (FSX/FSX:SE/P3Dv3-v4)

MilViz DHC-3T Turbo Otter (FSX/FSX:SE/P3Dv3-v4)

MilViz DHC-3T Turbo Otter (FSX/FSX:SE/P3Dv3-v4)

An Iconic Bushplane - now with PT6A Power!

Building on our experience with our award winning DHC-2 and DHC-3, we are pleased to bring the renowned DHC-3T Turbo Otter to both FSX and Prepar3D.

Our turbine-engined Otter provides a nuanced flight model that closely replicates the real deal with top-notch modeling and textures, custom systems programming, and a ton of configurable options!

Extending the capabilities a proven single-engine workhorse.
The original DHC-3 Otter ceased production in 1967. Since then many of these sturdy bushplanes have had their 600HP Wasp radials swapped out for a more powerful turbo-prop power plant thus improving reliability and performance. Our Turbo Otter features a Pratt and Whitney 750 HP PT6A-34 turbine and is based on the typical Viking or Vazar conversion with included STOL kit. In looks and performance it brings the Otter right up to date.

Turbo Otters like their radial predecessors are used extensively across all types of flights: charters, tourist work, cargo and scheduled service, flying passengers and bulky loads deep into the bush, to airfields that would be impossible for most other aircraft.

Same Character, More capable 
The overall gross weight is the same as the radial version, but the lighter weight of the turbo-prop powerplant allows the payload to increase by approximately 400lb. The increased power allows shorter take-offs and landings, greater rate of climb and a higher cruising speed - but be careful: in some situations the PT6 can deliver more power than the airframe can handle safely! 

The Turbo Otter can carry payloads up to 2,600 lbs.and has a maximum passenger capacity of 9. Cruise speeds up to 140 kts over a maximum range of about 625 miles.

Land Anywhere, Haul Everything 
The workhorse capabilities of the DHC-3T Turbo Otter are able to be put to the test. Four separate configurations have been included for landing gear: Standard wheels, amphibious floats, skis, tundra tires; each model complete with tuned flight dynamics that accurately reflects differences in performance and handling. 

The interior can be outfitted for nearly any adventure you'd like, with separate passenger and passenger/cargo combinations. Individual passenger and cargo locations can be loaded/unloaded in the simulator, allowing for the visual emulation of flying to a destination and back again.

Meticulously Detailed 
The MilViz DHC-3T Turbo Otter features an intricately modeled, true-to-life interior and exterior, with an abundance of fine detail. All gauges, switches and controls feature smooth animation. Custom lighting makes night operations atmospheric and immersive, while high resolution textures with lifelike metal effects and realistic weathering create a simulation like no other. 

PT6-34: 'By the Book' performance 
Using code developed for our forthcoming King Air, Tomas and his programming team have pulled out all the stops to bring you what we hope you will agree, is the most accurate and realistic rendition of a PT6A-34 available anywhere today.

All functions and characteristics emulate the real-world classic turbine down to a tee. If you have experienced one in real life you will recognise the distinctive start up, and the way power, sounds, temperature and internal pressures are all meticulously co-ordinated.

Engine model = Pratt & Whitney PT6A-34
Engine Power = 750 SHP Flat Rated up to 4000 ft. ISA conditions
Propeller = 3 bladed, constant speed.
Propeller model = Hartzell HC-B3TN-3DY /T10282+4

Custom modelled systems:

  • Startup procedure:
    • Totally realistic.
    • Spool up rates depending on different variable (fuel, temperature, altitude, battery power,etc).
    • Starter switch with different levels of precision:
      • Real: switch must be held on to keep the starter engaged
      • Basic: standard ON/OFF operation
      • Easy: Switch to off position automatically when engine in idle conditions
  • In-Flight different start procedures included:
    • Starter assisted
    • No Starter/Windmilling (depending on conditions)
    • Hot starts simulated due to different conditions (fuel too soon, low battery, etc)
    • FSX/P3D custom AutoStart included (CTRL-E)
  • Custom specific sounds for entire startup/shutdown sequence, both external and internal. Sound volume is user configurable with MVAMS.
  • Realistic propeller rotation at engine startup & shutdown.
  • Engine Performance modeled following real engine data from different tables.
  • Emergency Power System fully operational.
  • Engine failures because of limits exceeded (random)
  • Cold & Hot weather operations realistically simulated, including:
    • Oil pressure variable upon oil temp conditions
    • Oil temp variable upon OAT conditions
    • Combustion delays at low temperatures
  • Fuel System totally simulated, including:
    • Fuel transfer from forward/aft tank to center
    • Dual Boost Pump Operations
  • Custom Electrical System, including:
    • 2 x 24V 30 Ah dual battery configuration.
    • Starter/Generator dual operation.

Accurate & In-Depth
Building on our experience with replicating the DHC-2 Beaver and DHC-3 Otter, the MilViz DHC-3T Turbo Otter offers a comparable level of systems depth and functionality. Our goal is to create an immersive, true-to-life experience for any simulator pilot, regardless of experience. Choose to fly the Turbo Otter by the book, or simply jump in and fly, your choice!

Our DHC-3T goes far beyond the default simulator functionality in order to provide an accurate, realistic recreation of key characteristics and systems functionality. The electrical system is closely simulated, with operable circuit breakers present for key systems. The operation of the flaps, operated much like the Beaver with a selector valve and a hand pump, behaves realistically. And a powered tailwheel system has been custom created for this aircraft with a three way toggle switch that allows switching between powered, free castoring and locked.

The dangerous effects of icing is also simulated, with serious consequences for disregarding potentially dangerous flight conditions. Ice accumulation can be hazardous to the Otter, leading to airspeed loss and a stall; freezing rain can disrupt static instruments and cause incorrect readings.

And at the very core of this simulation is a carefully tuned flight model that seeks to impart the unique flight qualities of this STOL-capable workhorse, created by an author with DHC-3 experience.

Highly Detailed KAP 140 Autopilot
The DHC-3T Turbo Otter includes our custom coded, very accurate simulation of the venerable KAP 140 autopilot. Faithful to the original, from the font used to the replication of servo drives on the trim wheels and the yoke. The logic used in the KAP 140 has been carefully replicated to deliver one of the most realistic autopilot simulations available. A separate manual for the autopilot has been included.

Multi-Platform Support
The MilViz DHC-3T Turbo Otter package supports a full range of platforms, in a single downloadable installer:

  • FSX: Acceleration
  • FSX: Steam Edition
  • Prepar3d v3
  • Prepar3d v4

Navigate Your Way
Depending on the era and role you're simulating, we've allowed for an extremely wide variety of options for avionics and third party GPS units. With this package, an extensive amount of compatibility for popular third party gauges and avionics is available. Built-in configuration support from within our MVAMS application is included for the following:

  • Flight1 GTN 650 (Single)
  • Flight1 GTN 750 (Single)
  • Flight1 GTN 650 & 750 (Combo)
  • Reality XP GNS 430/530W XP (Combo)
  • Mindstar GNS 430/530 (Combo)
  • MilViz GNS 430/530 (Combo)
  • NavStax KingNav
  • or, standard radios only!

Please note that compatibility for the above 3rd party gauges (such as from Flight1, RealityXP, Mindstar, NavStax) includes support for installation and setup of our product only; use of any of the offered options requires a functional existing installation of the appropriate gauge.

Use of any 3rd party avionics package in any desired simulator is also of course restricted to the availability of the avionics package for that simulator. Please see the respective manufacturers websites regarding platform compatibility for your avionics package.

Included WX Advantage Weather Radar
The MilViz DHC-3T Turbo Otter package also includes a copy of the innovative MilViz / REX WX Advantage weather radar. The presence of this weather radar unit in the panel is completely optional - you can fly with or without it! (Please note: The included WX Advantage will only function in the DHC-3T.

Special DHC-3T Features:

  • Professionally created & tuned, high fidelity flight model including accurate characteristics specific to the DHC-3T.
  • Four Body Configurations - Standard Wheels, Floats, Amphibious Floats, Skis, each with individually tuned flight models. Multiple loadout configurations, with passengers and cargo. Selectable cargo includes an externally mounted canoe!
  • Custom coded and meticulously modeled PT6-34
  • Custom electrical system with display of electrical load and operable circuit breakers.
  • Custom over-boosting cumulative damage simulation.
  • Unique flap operation which simulates the usage of the manually operated hydraulic pump and selector on the DHC-3T.
  • Realistic locked / powered / free-castoring tailwheel simulation
  • Icing effects on airframe and static instruments fully simulated.
  • Accurately simulated KAP 140 autopilot.
  • Richly detailed cabin with beautiful high resolution textures and smoothly animated gauges.
  • Realistic and fully adjustable cabin and instrument lighting.
  • Authentic sound environment, inside and out.
  • Milviz / REX WX Advantage Weather Radar included and available as a 3D panel option.
  • Ability to completely hide yoke and column for ease of access to important switches and controls.
  • Highly configurable avionics with 3D panel installations for many GPS solutions, covering popular 3rd party add-ons such as Flight1 GTN, RealityXP GNS, and Mindstar GNS.
  • Professionally created liveries based on or inspired by real world aircraft.
  • Available layer-based paintkit for creating your own liveries.
  • Detailed & educational flight manual & detailed autopilot manual.
  • True Glass, Real Light included (current version P3D v4 only)

FREE Downloads

  1. MilViz DHC-3T Turbo Otter User Guide - Click Here
  2. KAP 140 User Manual - Click Here
  3. Paint Kit - Click Here
Details
CODE DL-MVDHC3TTO
COMPATIBILITY FSX / FSX STEAM / P3Dv3,v4
MEDIA INSTANT DOWNLOAD
SIZE (Mb) 752
DATE PUBLISHED August 2018
NOTES Version 180816 on server
PUBLISHER Milviz (MORE)
AIRCRAFT DeHavilland Turbo Otter
 
Our Price: AUD $59.95
Options
Delivery Options
Quantity 1 (this product is an instant download)

Customer feedback

Product rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.
 

LiveZilla Live Help